Sources Of Hazards - GRAFF Master M 6 Notice D'utilisation

Universal Slicer Master M 6 / M 9 / M 91

Sources of hazards

WARNING
EN
The rotating blade can cut off
body parts. Your fingers, especially
the thumbs, are endangered. For
this reason, never reach into the
space between the stop plate and
the holder for the material to be
sliced as long as the stop plate
is not completely closed, i.e., is
placed below "0".
Child-proof safety catch
You can push the carriage in front
of the blade and press in the car-
riage lock (child-proof safety catch)
to secure the blade (the stop plate
must be closed, i.e. be positioned
under "0"). The carriage fits snug-
ly.
Cutting with the quick-ac-
tion switch
Place the items to be sliced on
‹
the carriage.
Set the desired slicing thickness.
‹
Press the items to be sliced
‹
slightly against the stop plate
and uniformly guide the car-
riage against the blade.
Use your thumb to press the
‹
quick-action
switches on the motor.
Press your thumb against the
‹
quick-action switch while slic-
ing.
As soon as you remove your
‹
24
switch - that
thumb from the quick-action
switch the motor switches off.
Cutting with the continu-
ous operation switch
Use the continuous operation
switch to slice large quantities.
Place the items to be sliced on
‹
the carriage.
Set the desired slicing thickness.
‹
Press the items to be sliced
‹
slightly against the stop plate
and uniformly guide the car-
riage against the blade.
Turn the continuous operation
‹
switch clockwise up the limit
stop (1/4 turn).
Turn the continuous operation
‹
switch back to turn off the unit.
Let the motor cool off after us-
‹
ing continuously for approx. 9.5
minutes.
important!
Soft items to be sliced (e.g.,
►
cheese or ham) can be sliced
best when cool.
Soft items can be sliced better
►
when you push them slowly
forward.
When slicing cucumbers or
►
carrots, it is advantageous
if they are cut to a uniform
length beforehand and then
fed in with the food holder.