Blade Removal - GRAFF Master M 6 Notice D'utilisation

Universal Slicer Master M 6 / M 9 / M 91
Safety instructions
CAUTION
Follow the safety instructions below
before you start cleaning the unit:
Make sure the unit is switched
►
off and not connected to the
mains supply.
Check to make sure the limit
►
stop is closed (cutter blade is
covered).
Do not use any aggressive or
►
abrasive cleaning agents and do
not use any solvents.
Do not scratch off stubborn soil-
►
ing with hard objects.
► Do not wash in the unit in water
or immerse it into water.
Cleaning
Clean the exterior of the unit with
a soft, moist cloth. If heavy soiled,
a mild detergent can be used.

Blade removal

Please occasionally unscrew the
blade and clean the interior of the
unit. Especially, when "juicy" slic-
ing items (vegetables, fruit, roasts,
etc.) were sliced. Handle the blade
with great care!
WARNING
► CAUTION: sharp blade.
Pull the carriage completely
‹
closed.
Remove the blade cover by ro-
‹
tating it upwards with the black
handle.
You can now slightly press
‹
slightly against it to remove the
blade.
Loosen the blade by turning the
‹
blade screw counter clockwise
with a coin.
Clean the inside of the blade
‹
and the black ring with a moist
cloth.
Replace the blade in the reverse
‹
sequence.
important!
Periodically grease the marked
►
points.
WARNING
► This process must be per-
formed with great CAUTION
as this is an extremely sharp
object.
© Gebr. Graef & Co. KG
EN
Grease here
27