Food Holder; Blade Sharpener; Cleaning And Care - GRAFF Master M 6 Notice D'utilisation

Universal Slicer Master M 6 / M 9 / M 91

Food holder

When the items to be sliced are
EN
shorter and 10 cm so it is no long-
er possible to correctly hold onto
them, the food holder must be
used.
Place the food rests or the small
‹
items for slicing on the carriage.
Set the food holder on the rear
‹
of the carriage and put the food
holder onto the items to be
sliced.
Proceed as above as described in
‹
"Slicing".
important!
► The food holder lets you slice
small items such as mushrooms
and tomatoes.
The unit must not be used
►
without the food holder unless
the size and shape of the items
to be sliced do not permit its
use.

Blade sharpener

Use the enclosed blade sharpener
to re-sharpen the blade when the
cutter becomes too dull.
Turn the slicing thickness to 15.
‹
Put the blade sharpener on the
‹
carriage.
Push the carriage forwards until
‹
the blade sharpener touches the
blade.
Switch on the unit.
‹
26
Switch the unit back off after 2
‹
- 3 blade rotations.
Check the blade to see if there
‹
are any burrs.
Move your finger slowly from
‹
the inner to the outer edge. If
you detect a beaded grade, the
blade is sharp.
You should now use the honing
‹
stone.
Put the blade sharpener back on
‹
the blade.
Press the press lever for the
‹
grindstone.
Switch on the unit.
‹
Switch the unit back off after
‹
one blade rotation.
Please also read the operating in-
structions enclosed with the blade
sharpener.

Cleaning and Care

This chapter provides you with im-
portant information on cleaning
and caring for the unit.