Intended Use; Tools Required For Assembly - FISCHER Dach Mode D'emploi Original

2. intended use

The roof bike rack is used to transport one bicycle on a vehicle roof. The roof bike rack must be
assembled according to these operating instructions. Observe all applicable regulations (max.
speed limit, max. permissible total weight, etc.) when driving.

3. Tools required for assembly

The following tools are required for assembly:
4. Parts list for roof bike rack
Caution: Make sure no children are in the vicinity when working with these individual
parts. The bike rack contains small parts that pose a choking hazard!
18093_Betriebsanleitung.indd 9
2 x Ø 10 mm
10 mm
GB
9
13.02.15 11:24