FISCHER Dach Mode D'emploi Original page 13

step 4
Mounting your bike on the bike rack Two persons are required to complete
this step correctly.
Place your bike on the profiled wheel guide
(parts no. 2) as depicted in Ill. 5, loosen the
clamping knob on the side of the tube support
and then turn counterclockwise to the smallest
opening necessary to insert the bike frame.
See Ill. 4.
Now lift the opened frame support until it can
be attached to the bike frame. Now turn the
clamping knob clockwise until the fastening
elements on the frame support grasp the bike
frame. Lock the knob as depicted in Ill. 6.
Then secure the bike wheels using the included
safety belts (parts no. 10), one on the front
wheel and two on the back wheel. See Ill. 5.
Carefully make sure that the bike is securely
locked in place. Verify that all parts are
securely fastened and that the rubber
fastening parts on the frame support are not
deformed. If you are certain that your bike is
securely fastened in place, open the clamping
knob and repeat the step, this time move the
protective parts on the frame support closer
to the frame of your vehicle.
Lock using the key and remove from the bike
rack. It is prohibited to drive with the key
inserted in the bike rack lock. Keep the key
at a safe location.
18093_Betriebsanleitung.indd 13
GB
ill. 4
ill. 5
ill. 6
13
13.02.15 11:24