Data Management; Recalling Stored Values; Deleting Stored Values - Soehnle Systo Monitor 180 Mode D'emploi

DATA MANAGEMENT

Recalling stored values

1. Switch the blood pressure
GB
monitor on by pushing ( ).
The average value (AVG) of the
last three datasets will be dis-
played. If less than three records
are stored, then it will display the
latest record first.
2. Push the key ( ) or ( ) to get to
the desired datasets. While scroll-
ing, the number of the displayed
dataset will be shown in the left
bottom corner of the display.
If you leave a dataset displayed, date and time
of the measurement will also be shown. They
will be put through automatically.
3. If you would like to recall the
datasets of another user, first
push the key (
device off if the blood pressure
monitor is still in the "recall me-
mory" mode.
Push the key ( ) to enter the
mode "select user", push the key
( ) again to select between user
1 and user 2. Push the key (
to confirm and switch the device
off. Start again with Step 1.
The most current dataset (1) is shown first.
Each new measurement is stored at dataset
(1). All other datasets are moved back by one
(2 becomes 3, etc.) and the last dataset (60) is
removed from the list.
24 24
) to switch the
)

Deleting stored values

If a measurement is not performed
correctly, you can delete all measu-
rement results for the selected user
as follows.
1. Push and hold keys ( ) and ( )
simultaneously while the blood
pressure monitor is in the "recall
memory" mode. "dEL ALL" (delete
ALL) will flash and be displayed.
Push ( ) to exit the "delete" mode without
deleting datasets.
2. Push ( ) to confirm deletion,
and "dEL done" will be displayed.
The blood pressure monitor then
switches off automatically..