Intended Use - Makita DUM604 Manuel D'instructions

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Cutting width
Strokes per minute
Dimensions
(L x W x H)
Rated voltage
Battery cartridge
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
Keep bystanders away.
Cutting means continues to run after the
motor is switched off.
Do not expose to moisture.
Only for EU countries
Cd
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.

Intended use

The tool is intended for cutting lawn edges or sprouts.
353 mm x 177 mm x 131 mm
BL1815 / BL1815N / BL1820 / BL1820B / BL1830 / BL1830B /
BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
Noise
The typical A-weighted noise level determined accord-
ing to EN50636:
DUM604 with shear blade for grass shear installed
Sound pressure level (L
Uncertainty (K) : 0.98 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
The typical A-weighted noise level determined accord-
ing to EN60745:
DUM604 with shear blade for hedge trimmer
installed
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN50636:
DUM604 with shear blade for grass shear installed
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
DUM604 with shear blade for hedge trimmer
installed
Vibration emission (a
Uncertainty (K) : 1.5 m/s
10 ENGLISH
DUM604
160 mm
-1
2,500 min
D.C. 18 V
1.4 - 1.8 kg
) : 76 dB(A)
pA
Wear ear protection.
) : 74 dB(A)
pA
Wear ear protection.
2
) : 2.5 m/s or less
h
2
2
) : 2.5 m/s or less
h
2