Troubleshooting - Montarbo B Serie Notice D'emploi

TROUBLESHOOTING

10
The speaker does not turn on
The speaker does not turn on
Check for the correct power supply upstream of the system.
Check that the power cable with VDE connector is correctly inserted.
The speaker turns on but makes no sound
Check audio channels (CH1, CH2 and/or CH3) proper input connections.
Check that the cables used are properly working. Use only good quality cables in good
condition.
Check that audio sources are turned on and indicate the output signal.
Check CH1 input proper sensitivity.
Check CH1 proper synchronization of the Bluetooth
Check MAIN output level.
The speaker outputs poor or distorted sound:
Adjust the source volume appropriate of mixer section inputs.
Check that the cables used are not damaged. Use only good quality cables in good
condition.
Check inputs and MAIN volume levels.
Check the associated Bluetooth
Cut the level of the MIC, LINE and/or MAIN inputs.
Make sure you have not connected a line signal to channel 1 with MIC sensitivity.
Background noise
Turn off the power and disconnect all connected devices.
�� connectin� one device at a time� chec� the si�nal from each source to �nd out �hich
one caused the problem.
®
device output signal.
®
User manual
signal.
19