Installation Tips; Troubleshooting; Technical Specifications - Montarbo M Serie Notice D'emploi

M SERIES

INSTALLATION TIPS

7
For optimal positioning, set the speakers in vertical position at ear height (preferably use the
midpoint between woofer and tweeter as a reference). slightly tilted towards the listener.
It is advisable to mechanically decouple the monitors from the desk with proper insulating
foam supports (not included) to avoid undesired resonances. Avoid frontal obstacles that
may cover the reflex openings or the transducers

TROUBLESHOOTING

8
The loudspeaker will not turn on
Check that power supply is present upstream of the installation.
Ensure that the power supply cable is properly plugged in.
The loudspeaker turns on but produces no sound
Check connections to audio and Bluetooth
Check the cables for interruptions. Use only quality cables and connectors in good
condition.
Check that the audio sources are switched on and indicate output signal.
Check that the MAIN LEVEL potentiometer is set to a suitable level.
The loudspeaker does not allow stereophonic listening
Check connection between active and passive speakers.
Resonances are heard, in particular on low frequencies
Follow the installation tips, and use the EQ controls on the rear to correct any unwanted
reflections caused by the monitor position in the listening room.
16
channel inputs.
®

TECHNICAL SPECIFICATIONS

9
MODEL M6M
Type 2-way bass reflex
MAX SPL (@ 1m) 111 dB
Frequency response (-10 dB) 40 Hz-22 kHz
HF 1" silk dome tweeter
LF
6.5" woofer custom,
reinforced fibreglass cone
X-OVER 1650Hz
Amplification class A/B
Peak power 30 W + 30 W
Operating voltage 110-120V~ 50-60Hz
220-240V~ 50-60Hz
Signal processing
Analogue, active electronic crossover
and active protection circuit
of transducers.
Bluetooth
® V5.0
I/O connectors
2 x BALANCED TRSs
2 x UNBALANCED AUX IN RCAs:
3.5 mm
HEADSET OUTPUT: 3.5 mm
Controls MAIN level
EQ: Low / High
Bluetooth button
®
Fuse 110-120V~: T1.6A L 250V~
220-240V~: T3.15A L 250V~
Power consumption at 1/8th
0.63 A (110-120V~)
of the power 0.33 A (220-240V~)
(average conditions of use)
Power consumption at 1/3rd 0.93 A (110-120V~)
0.5 A (220-240V~)
of the power
(maximum conditions of use)
Standby consumption 12 W
Cabinet material MDF, front in ABS
Dimensions (L x H x D) 250 x 430 x 237 mm
(9.8" x 16.9" x 9.3")
Weight of speakers 1+2 8.5 kg (18.74 lbs) + 6.2 kg (13.668 lbs) 11.3 kg (24.92 lbs) + 8.5 kg (18.74 lbs)
User manual
M8M
2-way bass reflex
113 dB
35 Hz-22 kHz
1" silk dome tweeter
8" woofer custom,
reinforced fibreglass cone
1450Hz
A/B
50 W + 50 W
110-120V~ 50-60Hz
220-240V~ 50-60Hz
Analogue, active electronic crossover
and active protection circuit
of transducers.
V5.0
2 x BALANCED TRSs
2 x UNBALANCED AUX IN RCAs:
3.5 mm
HEADSET OUTPUT: 3.5 mm
MAIN level
EQ: Low / High
Bluetooth button
®
110-120V~: T4A L 250V~
220-240V~: T2A L 250V~
1.1 A (110-120V~)
0.57 A (220-240V~)
1.6 A (110-120V~)
0.85 A (220-240V~)
14 W
MDF, front in ABS
310 x 524.5 x 280 mm
(12.2" x 20.6" x 11")
17