Attaching And Detaching A Lens - Canon EOS Rebel T3 Mode D'emploi

Attaching and Detaching a Lens

Attaching a Lens
White index
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
Remove dust on the body cap before attaching it.
Remove the caps.
1
Attach the lens.
2
Red index
On the lens, set the focus mode
3
switch to <AF> (autofocus).
Remove the front lens cap.
4
Remove the rear lens cap and the
body cap by turning them as shown
by the arrows.
Align the lens' red or white index with
the camera's index matching the
same color. Turn the lens as shown
by the arrow until it snaps in place.
If it is set to <MF> (manual focus),
autofocus will not operate.
29