Charging The Battery - Canon EOS Rebel T3 Mode D'emploi

Charging the Battery

LC-E10
LC-E10E
It takes approx. 2 hours to fully recharge a completely exhausted
battery at 23°C / 73°F. The time required to recharge the battery
depends on the ambient temperature and the battery's charge
level.
For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take a longer time (up to 4 hours).
20
Remove the protective cover.
1
Detach the protective cover provided
with the battery.
Attach the battery.
2
As shown in the illustration, attach the
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
Recharge the battery.
3
For LC-E10
As shown by the arrow, flip out the
battery charger's prongs and insert
the prongs into a power outlet.
For LC-E10E
Connect the power cord to the
charger and insert the plug into the
power outlet.
Recharging starts automatically and
the charge lamp turns orange.
When the battery is fully recharged,
the full-charge lamp will turn green.