Important information
About the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
Describes damage that does not affect
NotIcE
the person.
Link to the mounting information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
target readership and qualifications
The bathtub must only be installed by trained plumbing
engineers.
Risk of product and/or
NotIcE
property damage!
> Observe the local installation regulations and any
country-specific standards at all times.
Mounting instructions
Please read pre-installation data sheets prior to the
installation. These are available to download on the
Internet at www.pro.duravit.com.
6
Positioning the installation aids
The bathtub drain is not located in the centre.
> Observe the dimensions from diagram 5 for
the positioning of the installation aids.
16
Using silicone without acetic acid
> Use alkoxy-based silicone.
5
BA_M_DuraSolid_FST/17.05.5