Important Information; Safety Instructions; Mounting Instructions - DURAVIT Happy D.2 700316 Notice De Montage

Important information

Mounting instructions information
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Target readership and qualifications
The bathtub must only be installed by trained plumbing
engineers.
Explanation of the symbols
Link to the mounting instructions in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness

Safety instructions

Product and/or property damage
Careless handling can result in damage to the surface of
lacquered bathtubs.
> Protect the bathtub from knocks and scratches during
installation and transport.
A breach of local and country-specific regulations and
standards can cause damage to the product
and/or property damage.
> Observe the local installation regulations and any
country-specific standards at all times.

Mounting instructions

Please read the pre-installation information sheets prior
to the installation. These are available to download on the
Internet at www.pro.duravit.com.
1
Avoiding damage
> Protect the bathtub from knocks and scratches in
order to avoid damage to lacquered surfaces.
3 Mounting the cable-driven waste and overflow
The connecting hose #790159/#790166 is
recommended for mounting a bath spout with a waste
and overflow set or base inlet.
56770_BA_M_with integrated panel/20.08.8
5