Hardware Setup - Kicker IQ Série Mode D'emploi

Hardware Setup

Mounting
Mount the amplifi er to the desired
location using the included screws. Do
not drill into any electronics, wiring, or
vehicle mechanisms.
Wiring
Wire +12V and Ground connections.
Install a fuse within 18" of battery and
in-line with power cable connected
to your amplifi er. See diagram on
next page for reference. See the
following charts for appropriate
gauge and fuse ratings.
Ampere ≤4ft
60 8GA
100 4GA
4
2015 IQ Quick Start Rev C.indd 4 2015 IQ Quick Start Rev C.indd 4
4–7ft 7–10ft 10–13ft
8GA 4GA 4GA
4GA 4GA 4GA
Model External Fuse
IQ500.1 60 Ampere
IQ500.2 60 Ampere
IQ500.4 60 Ampere
IQ1000.1 100 Ampere
IQ1000.5 100 Ampere
13–16ft 16–19ft 19–22ft
4GA 4GA 1/0GA
1/0GA 1/0GA 1/0GA
22–28ft
1/0GA
1/0GA
12/4/2014 1:29:53 PM 12/4/2014 1:29:53 PM