Setting The Clock - JVC KD-AR300 Manuel D'instructions

Setting the clock

1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 25.)
2
Set the hour.
1 Select "CLOCK H" (hour) if not shown on
the display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK M" (minute).
2 Adjust the minute.
1
4
Finish the setting.
2
2
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
• During tuner operation:
Frequency
• During disc operation:
Elapsed
playing time
Track title
Notes:
• While playing an audio CD, "NO NAME" appears
for the disc title/performer and the track title.
• For indication change while playing a CD Text or
an MP3 disc, see also pages 16 and 19.
• For KD-AR300:
During external component operation:
LINE IN
• For KD-AR300:
During SIRIUS operation:
SIRIUS
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
Clock
Clock
Disc title /
performer
Clock
Clock
9