Cd Operations; Playing A Cd - JVC KD-AR300 Manuel D'instructions

Refer to "MP3 OPERATIONS" on pages 18 to 21
for operating MP3 discs.

Playing a CD

Insert a CD into the loading slot.
The unit turns on, draws
the CD and starts
playback automatically.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing
CD CD-CH (for KD-AR300) or CD (for KD-G300)
turns on the unit and starts playback automatically.
CD indicator
Current source indication
Total playing time
of the inserted disc
Elapsed playing time
All tracks will be played repeatedly until you stop
playback.
Total track number
of the inserted disc
Current track
number

CD OPERATIONS

Notes:
• When a CD is inserted upside down, "EJECT"
appears on the display and the CD automatically
ejects.
• If there is no CD in the loading slot, you cannot
select CD as the source. "NO DISC" appears on
the display.
• If the current disc is a CD Text, disc title/performer
and then track title will automatically appear.
To stop play and eject the CD
Press 0.
CD play stops and the CD automatically ejects
from the loading slot. The source changes to the
previously selected source.
• If you change the source, CD play also stops
(without ejecting the CD).
Next time you select "CD" as the source, CD
play starts from where playback has been
stopped previously.
Notes:
• If the ejected disc is not removed for about
15 seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
13