Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
SoundPort / SoundPort Compact / SoundPort Mini
Operating instructions

Bluetooth link

Linking the audio source via Bluetooth
You can link your SoundPort to an audio source, e.g., smartphone, tablet PC, etc. using a wireless Bluetooth
connection. The audio sources must support the Bluetooth A2DP protocol.
The distance between your SoundPort and the audio source must be no more than
10 m (line of sight).
The SoundPort stores the last 5 audio sources linked via Bluetooth. In this way, the
link will be established more quickly when linking again. However, only one active link
is possible at the same time. If a new audio source is added, the "oldest" stored audio
source is deleted from the list of links.
Bluetooth has been selected as source (see page 39).
Press the key
You hear a signal tone.
The LED display
Enable the Bluetooth function of your audio source. If necessary, get help from the
instruction manual of your audio source.
If necessary, confirm the Bluetooth Search function of the audio source.
Now, Bluetooth devices will be searched near the audio source.
Select SoundPort_xx
After the linking is completed you hear a signal tone.
The LED display
(see page 49).
For some audio sources, the link must be explicitly enabled before music playback can
be heard from the SoundPort.
SRC
When changing the source by pressing the SRC key
paused / stopped, but the link to the audio source remains.
When pressing the ON/OFF key
An ongoing music playback is paused / stopped, the link with the audio source is inter-
rupted.
After switching the SoundPort on again using the ON/OFF key
to relink to the audio source. In this state, the LED indicator
After successful linking the LED will light up permanently.
(1
xx represents the last two positions of the MAC address of the SoundPort.
44
on the SoundPort for a longer period (approx. 3 sec).
3
8
flashes.
(1
. If a code is requested, enter 0000.
8
lights up continuously, the SoundPort is now ready for audio playback
1
the SoundPort will be switched to the Standby mode.
2
the ongoing music playback is
1
, the SoundPort tries
8
flashes.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Soundport compactSoundport miniAudiodesign soundport compact

Table des Matières