Water Inlet Filters; Operating Problems - Electrolux EWB 105405 W Notice D'utilisation

Masquer les pouces Voir aussi pour EWB 105405 W:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DRAIN FILTER
Regularly clean the drain filter which is loca-
ted at the bottom of the drum :
1
2
4

OPERATING PROBLEMS

Numerous checks were carried out on your
appliance before it left the factory. Howev-
er, should you notice a malfunction, please
Problems
The appliance doesn't
start or doesn't fill :
The appliance fills but
empties straight away :
The appliance doesn't
rinse or doesn't empty :
The appliance doesn't
spin :
6
5
3
• the appliance isn't plugged in correctly, the electrical installation isn't
working, there is a power failure,
• the lid of your appliance and the drum shutters aren't closed firmly,
• the programme start command hasn't been properly selected,
• the water supply has been cut off, the water inlet tap is closed,
• the water inlet filters are dirty (see "Care and cleaning").
• the drainage U-piece is fixed too low (see "Installation").
• the drain hose is blocked or bent,
• the object trap is obstructed (see "Care and cleaning" ),
• the out of balance detector has been activated : washing is unevenly
distributed in the drum,
• the "Drain" programme or "Night Cycle" or "Rinse hold" option have
been selected,
• the height of the drainage U-piece is unsuitable.
• balance problem with the laundry load: add more laundry or manually
adjust the items in the drum.
7

WATER INLET FILTERS

To clean, proceed as follows :
refer to the sections below before contact-
ing the after-sales service.
Causes
electrolux 9
8
9
10
CLACK
11
CLACK

Publicité

Chapitres

Table des Matières
loading

Table des Matières