Accessories - Conti Grinder200 CG-200 OD Manuel D'utilisation

6. ACCESSORIES

•
Filter holder support
Fig.6.1
Fig.6.3
•
Notice the two holes under the filter fork support (fig.6-1)
•
Unpack the accessory (fig.6.2), which is packed separately within the grinder packaging.
•
Insert the accessory into the 2 holes (fig.6.3)
•
Place your filter supported by the fingers and the back accessory. (fig.6.4)
SACOME, Document CONFIDENTIEL,
Edition 11/2016 - CG200 OD
Ne peut être reproduit ni communiqué sans notre accord préalable.
- 18 -
Fig.6.2
Fig.6.4