Water Level; Remote Control - Steba LB 7 Mode D'emploi

Heating
By pressing the "heating" button the water will be slightly preheated to guarantee
that the water mist does not withdraw too much temperature from the ambient air.
Energy consumption 100W.
Ionization
By pressing the "Ionization" button the water mist will be enriched with negative
ions. This effect is like after a summer thunderstorm.
Quantity of ions per cubic centimeter of air:
at high mountain 8000 ion/ccm
at the sea 4000ion/ccm
at the countryside 1200ion/ccm
in the city 200ion/ccm
in the office only 20 ion/ccm

Water level

The appliance makes a 10 times beep sound and shows the pictogram "water level"
in the display if not enough water is left in the tank. Please remove all water out of
the tank if the appliance is not used for a couple of days to prevent the formation of
mold and algea.

Remote control

Symbols on the remote control are
the same as on the device.
Pay attention that there are no
obstacles between the device and
the remote control.
Cleaning
∙ The appliance must be cleaned
more often the harder the water
is. Too much lime disturbs the cor-
rect working of the appliance and
leads to the formation of scale.
In this case use boiled or distilled
water. In any case do not use carbonated mineral water!
∙ Unplug the appliance first.
Never immerse the appliance into water.
∙ The appliance must be unplugged and the water must be removed from the base and out
of the water tank by opening the cover at the bottom of the water tank and pour out the
water. Only close the water tank again when the appliance should be used again, else the
water tank should dry up completely.
∙ Scale remains at the base, the transductor and the water tank should be wiped away. It is
essential, that the transductor is not damaged. When there is excessive scale some scale
On/Off
Ultrasound
Humidity
Ionization
Heating
Timer
13