LaserLiner PrecisionPlane-Laser 3D Pro Mode D'emploi page 17

2
Power supply
To insert the lithium-ion
rechargeable battery
Open the battery compartment
and insert the lithium-ion battery
as illustrated.
Operation with power pack/
battery charger
The device can be used with the
supplied power pack/battery charger.
The battery is not charged
!
when connected to the power
supply.
3
Positioning laser lines
The adaptable metal base allows precise positioning of the laser lines.
D
PrecisionPlane-Laser 3D Pro
A Undo threaded adapter lock
B
screw (11)
A
B Remove 5/8" threaded adapter (5)
and screw the device into the 5/8"
thread (4) in the stand.
C Place the device with 5/8"
threaded adapter on the metal
base and tighten the lock screw
To secure the device correctly
!
it must snap into the groove
(D).
17
EN