Specifications - iHealth View BP7S Mode D'emploi

• Please repeat these steps when you switch to another Android device with the monitor.
Remember to:
1. Make sure your wrist size is within cuff circumference; see the range in "SPECIFICATIONS"
2. Measure on the same wrist each time.
3. Stay still and calm for one to one and half minutes before taking a blood pressure measurement. Prolonged
over-inflation of the bladder may cause bruises of your wrist.
4. Keep the cuff clean. Cleaning the cuff after every 200 times of usage is recommended. If the cuff becomes
dirty, clean it with a moistened cloth. Do not rinse the monitor or cuff with running water.
5. Press the "START/STOP" button at any time to interrupt a measurement.
Note: Physical activity, eating, drinking, smoking, excitement, stress, and many other factors influence blood
pressure results.

SPECIFICATIONS

1. Product name: iHealth View Wireless Blood Pressure Wrist Monitor
2. Model: BP7S
3. Classification: Internally powered; Type BF applied part; IP22, No AP or APG; Continuous operation
4. Machine size: approx. 2.8"×2.9"×0.7" (72mm×74mm×17.6mm)
5. Cuff circumference: 5.3"- 8.7" (13.5cm-22cm)
6. Weight: approx. 4.2oz(120g)(including cuff)
7. Power: DC:5.0V
8. Measurement range:
Cuff pressure: 0-300 mmHg
Systolic: 60-260 mmHg
1.0A, Battery: 1*3.7V Li-ion 400mAh
6