Cleaning; Cleaning The Body Of The Air Puri Er; Cleaning The Air Quality Sensor - Philips AC2889 Mode D'emploi

5 Cleaning

Note
• Always turn the air purifier off and
unplug from the electrical outlet
before cleaning.
• Never immerse the air purifier in
water or any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part
of the air purifier.
• Only the pre-filter is washable. The
air purification filter is not washable
nor vacuum cleanable.
• Do not attempt to clean the filters
or air quality sensor with a vacuum.
Cleaning the body of the
air puri er
Regularly clean the inside and outside
of the air purifier to prevent dust from
collecting.
1
Use a soft, dry cloth to clean both
the interior and exterior of the air
purifier.
2
The air outlet can also be cleaned
with a dry, soft cloth.
Cleaning the air quality
sensor
Clean the air quality sensor every
2 months for optimal functioning of the
purifier.
Note
• If the air purifier is used in a dusty
environment, it may need to be
cleaned more often.
• If the humidity level in the room
is very high, condensation may
develop on the air quality sensor
and the air quality light may indicate
a more poor air quality even though
the air quality is actually good. If this
occurs, clean the air quality sensor
or use the air purifier on a manual
speed setting.
1
Switch off the air purifier and
unplug from the wall outlet.
2
Clean the air quality sensor inlet
and outlet with a soft brush (fig.u).
3
Remove the air quality sensor cover
(fig.v).
4
Clean the air quality sensor, the
dust inlet and the dust outlet with a
damp cotton swab (fig.w).
5
Dry all parts thoroughly with a dry
cotton swab.
6
Reattach the air quality sensor
cover (fig.x).
EN 11