Cleaning And Maintenance; Cleaning The Body Of The Air Purifier; Cleaning The Particle Sensor; Cleaning The Surface Of The Filter - Philips AC2936 Mode D'emploi

4 Cleaning and maintenance

Note:
• Do not attempt to clean the particle sensor with a vacuum cleaner�
• Switch off the air purifier and unplug from the power socket before following action�

Cleaning the body of the air purifier

Use a soft, dry cloth to clean both the interior and exterior of the air purifier
and the air outlet (fig u)�

Cleaning the particle sensor

Clean the particle sensor every 2 months for optimal functioning of the
appliance�
1
Clean the particle sensor inlet and outlet with a soft brush (fig v)�
2
Clean the particle sensor with a damp cotton swab� Dry all parts
thoroughly with a dry cotton swab (fig w)�

Cleaning the surface of the filter

Clean the surface of filter with vacuum cleaner when the filter cleaning alert
display on the screen (fig x)�
1
Pull the back cover and remove it from the appliance (fig c)�
2
Pull the filter from the appliance (fig d)�
3
Clean the surface of the filter with a vacuum cleaner (fig y)�
4
Put the filter back into the appliance (fig f)�
5
Reattach the back cover (fig g)�
6
Touch the button to switch on the appliance (fig h)�
7
Touch and hold the filter status check/reset button
reset the filter cleaning time (fig z)�
8
Wash your hands thoroughly after cleaning the filter (fig {)�
EN
6
for 3 seconds to