Cleaning Your Appliance; Clean The Body Of The Appliance; Clean The Air Quality Sensor And Humidity Sensor - Philips AC4084 Mode D'emploi

5 Cleaning your
appliance
Note
•
Always unplug the appliance before you clean it.
•
Never immerse the appliance in water or any
other liquid.
•
Never use abrasive, aggressive, or flammable
cleaning agents such as bleach or alcohol to
clean any part of the appliance.
•
Only the pre-filter and humidification filter are
washable. Other air purifier filters are NOT
washable nor vacuum cleanable.
Clean the body of the
appliance
Regularly clean the inside and outside of the
appliance to prevent dust from collecting.
1
Wipe away dust with a soft dry cloth from
the body of the appliance.
2
Clean the air inlet and the air outlet with a
soft dry cloth.
Clean the air quality sensor
and humidity sensor
Clean the air quality and humidity sensors
every month for optimal functioning of the
appliance. Clean it more frequently if you use
the appliance in a dusty environment.
Note
•
When the humidity level in the room is very
high, it is possible that condensation develops on
the air quality sensor. As a result, the air quality
light may indicate that the air quality is bad even
though the air quality is good. In this case you
have to clean the air quality sensor or use one of
the manual speed settings.
1
Clean the inlet and outlet of the air quality
and air humidity sensors with a soft brush.
2
Remove the cover of the air quality and air
humidity sensors.
EN 17