Tightening Torques; Troubleshooting; Troubleshooting Schedule - RedMax CZT60+ Manuel D'utilisation

Always use good quality grease. Always use
recommended oil, refer to
29 .
To lubricate the front wheels
Note:
Use a grease gun when you lubricate the
front wheels.
• Lubricate each set of front wheel mounts (A) and
bearings (B) 3-4 strokes.
A

Tightening torques

Engine crankshaft bolt
Deck pulley bolts
Lug nuts
Blade bolts
Spark plug

Troubleshooting schedule

If you cannot find a solution to your problems in this
operator's manual, speak to your RedMax service
agent.
1739 - 001 - 08.11.2021
Technical data on page
B

Troubleshooting

To lubricate the cutting deck
spindles
1. Set the cutting deck in mow position.
2. Lubricate each cutting deck spindle 2-3 strokes.
Note:
Use a grease gun with a rubber hose
when you lubricate the cutting deck spindles.
68 Nm / 50 lb ft
204 Nm / 150 lb ft
102 Nm / 75 lb ft
122 Nm / 90 lb ft
22 Nm / 16 lb ft
25