RedMax CZT60+ Manuel D'utilisation page 16

Maintenance
Make sure that there are
no damage on the prod-
uct.
Make sure that there are
no loose parts.
Do a check for damages
on the cutting deck.
Do a check of the cutting
deck for adjustment.
Do a check of the tire
pressures.
Do a check of the battery
connections.
Do a check of the throttle
cable.
Do a check of the caster
wheels (each 200 hours).
Do a check of the clear-
ance of the engine
1
valve.
Clean the air intake of the
engine.
Clean the air intake of the
2
engine.
Clean the bottom side of
the cutting deck.
Clean around the engine.
Clean around the belts
and the belt pulleys.
Do a check of the belts
and the belt pulleys.
Clean the foam pre-filter
3
(if equipped).
Replace the foam pre-fil-
4
ter (if equipped).
Clean the paper filter car-
5
tridge.
1
Must be done by approved service agent.
2
In conditions with dust, cleaning and replacement must be done more frequently.
3
In conditions with dust, cleaning and replacement must be done more frequently.
4
In conditions with dust, cleaning and replacement must be done more frequently.
5
In conditions with dust, cleaning and replacement must be done more frequently.
16
Daily maintenance
Before After
*
*
*
O
X
*
*
Do mainte- Maintenance interval in hours
nance at a
minimum of
25
1 time each
year
X
X
X X
X
*
O
O O
X
O O
O
O O
50 100 300
X X
X X
O
X
* *
X
1739 - 001 - 08.11.2021
X
X
X
*
*