Turntable Installation - Linea 2000 DOMO DO2324 Mode D'emploi

PARTS
a . control panel
B. Turntable shaft
c. Turntable ring assembly
d. glass tray
e. observation window
f. door assembly
g. safety interlock system

TURNTABLE INSTALLATION

1. first place the turntable ring in the middle of the
microwave oven.
2. Place the turntable on the ring. Make sure that the
middle of the turntable fits into the turntable shaft.
CAUTION:
• never place the glass tray upside down. The glass tray should never be restricted.
• Both glass tray and turntable ring assembly must always be used during cooking.
• all food and containers should be placed onto the glass turntable during cooking
at all times.
• if the glass tray or turntable ring assembly cracks or breaks, contact your nearest
authorized service center.
INSTALLATION
remove all packaging material and
accessories.
check the oven for any damage,
such as dents or a damaged door. do
not use the oven if it is damaged.
Remove the protective film around
the machine, this is applied to avoid
scratches.
1. choose a place to install the
microwave, where there is sufficient open space for the air intake and exhaust.
49
DO2324