Instructions For Use; Mounting Instructions - Pelgrim OVG 214 Notice D'utilisation

Before connecting the appliance to the
mains supply, leave it stand for about
2 hours which will reduce the
possibility of malfunctions in the cooling system
that might have occurred due to transport
handling.
Clean the appliance thoroughly, especially the
interior (see Cleaning and Maintenance).

Instructions for use

These instructions for use were prepared for the
user. They describe the appliance and its correct and
safe use. They were prepared for various
types/models of appliances therefore you might find
in it description of some functions and accesories
that do not apply to your appliance.

Mounting instructions

Integrated appliances are equipped with instructions
for mounting the appliance into the kitchen unit.
The appliance should be professionally mounted by
qualified technician and instructions are for his use
only.
We care for the environment
Our products use environmentally friendly
packaging, which can be either recycled or
disposed of in an environmentally friendly
manner. To this end, individual packaging
materials are clearly marked.
These instructions are printed either on recycled
paper or chlorine free bleached paper.
When your appliance finally wears out, please try
not to burden the environment with it; call your
nearest authorised service agent.
(See Disposing of the Worn Out Appliance)
Tips for energy savings
This is especially important if you have an upright
model.
Check periodically if the appliance is provided
with sufficient cooling (undisturbed circulation of
air through the bottom rail openings).
Turn the thermostat knob from higher to lower
setting as soon as possible (depends on how
loaded the appliance is, ambient temperature...)
Never use continuous operation unless
unnecessarily required; switch the operation
mode selection switch to the setting for
automatic operation as soon as possible.
Before freezing packages of fresh foods, make
sure they are cooled to ambient temperature.
(except for the soup)
Ice and frost layer increase energy consumption,
so do clean the appliance as soon as the layer is
3-5 mm thick.
If the gasket is damaged or if it turns out that
the sealing is poor, the energy consumption is
substantially higher. To restore efficiency,
replace the gasket.