Control Panel; Temperature Selection - Pelgrim OVG 214 Notice D'utilisation

The freezer is controlled with switches and
thermostat button, incorporated in the bottom
section of the appliance.

Control panel

1 ON/OFF switch (green signal lamp)
2 Continued operation button (yellow signal lamp)
3 Alarm off button (red signal lamp)
ON/OFF switch (1)
The appliance is switched on - the green light is on.
The appliance is switched off - the green light is off.
Continued operation button (2)
This switch is used to select one of the two
operation modes: continuous and automatic.
Continuous operation - the yellow light is on.
The cooling system operates continuously. This mode
is selected when you want to freeze large amounts
of fresh foods and in case you want to deep freeze
already frozen foods.
Automatic operation - the yellow light is off.
The interior temperature is controlled by the
thermostat which turns the cooling system on and
off.
The frequency of switching the cooling system on
and off depends on:
the thermostat knob position (thermostat setting),
how often you open the door; and
ambient temperature.
Alarm off button and the red signal lamp (3)
The sound of the alarm is switched off by pressing
the Alarm Off button. The alarm goes off because of
high temperature inside the freezer (red signal lamp
is on), or because of the excessive dust collected at
the condenser (red signal lamp is off).
Consult the Section Troubleshooting Guide

Temperature selection

When the freezer operates automatically, the interior
temperature is controlled by the thermostat.
The most suitable thermostat position is in the
middle between max (7) and min (1).
We recommend setting the thermostat on positions
towards max (7) only in case you want to accelerate
cooling, as for example before loading smaller
amounts of fresh foods or when the operation mode
shall correspond to the ambient temperature.
Thermostat settings towards min (1) help you save
energy provided that the freezer is loaded with
smaller amount of frozen foods.
Changes of the ambient temperature affects
temperature in the interior of the appliance. Choose
correct setting of the thermostat knob.