Panasonic TY-ST85PF12 Manuel D'installation page 7

Assembly
2. Mounting supports and joint fixture
1. Confirm which is the front and rear of stand base  .
The side to which the poles are closer is the rear.
2. Slip the left and right supports  onto the poles of
stand base  from the top so that the display mounting
fixtures  face the front.
3.
Mount joint fixture  .
Loosely insert 1 joint fixture screw  to the rear of
each support  (left and right).
Insert the joint fixture on the screws from above,
with the clamp mounting holes facing the rear.
Finish tightening the joint fixture screws  which
were previously loosely inserted.
•
The screws should be securely tightened to the torque
given below.
(1.2~1.5 N•m)
18
Front
Stand base 
Display mounting fixtures 
Front
Stand base 
Clamp mounting holes
Front
Supports 
Poles
Rear
Supports 
Rear
Joint fixture 
Joint fixture
screws 
Rear