Epson BrightLink 421i Guide D'installation page 36

6 Appendix
Using the Easy Interactive Function (BrightLink models only)
After you install a BrightLink model, you need to perform calibration to align the positions of the cursor and
interactive pens.
In order to use the Easy Interactive Tools software, you must first install the software on the computer. Mac
OS X users also need to install a driver that enables the pens to work. Both software programs are included
with the BrightLink projector or can be downloaded from the following sites:
U.S.: epson.com/support/brightlinkdownloads
Canada: epson.ca/support/brightlinkdownloads
For details on installing the software and calibrating the pens, see the on-screen User's Guide.
After installation of the projector is complete, make sure you leave the remote
control, batteries, and software CDs in the room with the projector. For BrightLink
models, also leave the pens, batteries, pen tray, and battery charger in the room
with the projector.
36