Disassembling - L-Acoustics ETR8-2 Manuel D'utilisation

XT
COAXIAL RANGE -
rigging procedures
VERSION 1.1
3. Position the shackle in the predetermined hole: hole position #3 for azimuth angle setting, or hole positions #1 to
5 corresponding respectively to site angles of +14°, +7°, 0°, -7°, -14°.
Figure 18: XTLIFTBAR with shackle in hole position #4 (-7° site angle)
4. Fly the enclosure by rigging to the shackle.
L-ACOUSTICS recommends using an additional safety point when rigging enclosures.
!
A safety eye-bolt accessory can be added using the M8* insert located on the rear face
of the 12XT enclosure (see Figure 19).
WARNING
* The "M8" notation refers to the European standard (see applicable external documentation).
6.4.2

Disassembling

Disassembling should be carried out in the reverse order of assembly.
XTP_RM_ML_1.1
P
SELF-POWERED COAXIAL RANGE
4
3
2
1
w w w . l - a c o u s t i c s . c o m
5
20 en