Brew Monk TITAN Mode D'emploi page 29

2.5.2.3 Input/Changing Memory Function for Auto Mode
When in BLANK PAGE, simultaneously press POWER and TIMER buttons for 5 seconds.
The display will enter into recipe selection. Press "-" or "+" to choose required recipe
(R0S1, R1S1, ...). Recipe storage is up to 10 programmes. Press START button to
confirm the selected recipe, BLANK PAGE will appear on display, then press AUTO/
PAUSE button to enter the selected recipe edit page. You can press START button to
run the selected programme instantly or press AUTO/PAUSE button to edit/check the
programme step by step.
Press AUTO/PAUSE to enter recipe edit page.
Press AUTO again to
edit/check next step.
Press AUTO in boiling step
for hops reminder setting.
If you want to skip the
hop reminder setting,
press START again,
machine starts to heat.
2.5.3 Recipe Selection in Auto Mode
Press POWER & TIMER simultaneously for 5 seconds in BLANK PAGE
Press START/STOP to confirm the chosen recipe and enter into BLANK PAGE.
Press AUTO/PAUSE button to enter chosen recipe edit page. You can edit
POWER/TIMER/TEMP or press START/STOP button to start the machine.
You can edit TEMP/POWER/TIMER.
Do not press START in boiling
step, machine starts to heat.
RXSX at the top left corner
to enter into recipe selection mode.
Press "-" or "+" for recipe selection.
Please do not switch off the machine.
Instruction Manual Brew Monk Titan - EN
will keep blinking when
machine is running.
Press "-" or "+" to set timer for
hops reminder.
Press TIMER button to set
2 hops reminder.
nd
Press START button
to start heating.
29