Putting Into Operation - Petra electric Mokka MC 4 Mode D'emploi

Unplug in the following cases:
- faults during use
- prior to cleaning and maintenance
- after use.
Do not immerse the heating vessel or base in water.
In case of misuse, wrong handling or incorrect repair no liability will be
taken for possible damages. Claims under guarantee are also excluded
in such cases.
The appliance is not designed for commercial purposes.
In case the cord of this appliance is damaged, it has to be replaced by
authorized service agent of the manufacturer or a person having similar
qualifications. Substantial dangers for the user can appear from inap-
propriate repairs.

Putting into operation

Before first use clean all the components and rinse them under clear water.
Firstly unscrew the jug (3) from the heating vessel (2) by turning counter-
clockwise.
The heating vessel must not be
immersed into the water.
In order to take off the filter disk (9)
remove the sealing (10) which must not
be damaged. Inserting must be effect-
ed in a way that the joint disk and the
filter disk are laid side by side.
The non-required length of the cord can
be rolled up at the bottom of the base (1).
The cord must not touch the hot appli-
ance. Put the plug into an earthed socket.
9