LOTRONIC AFX LiGHT SPARKULAR-MINI-FALL Manuel D'utilisation page 4

Options Range
Default Parameter
Standby switch
CABLE DMX MODE
When using the DMX controller, the system takes 2 channels
The First channel
0-15
16-255
The second channel
60-80
20-40
0-10
240-255
USE:
Power cable connection:
For convenient use, there are power supply cables and power supply ex-cables. Power Supply ex-
cable allows connecting up to 12 units in cascade. All power plugs are industrial plugs with lock,
you need to toggle snap and rotate when using.
Wireless remote control mode:
If the remote control cannot work, please check whether wireless function
was turn on.
Press MENU to switch to wireless control setting, menu is set to "ON", press
"ENTER".
This interface can also be matching code with remote controller.
The unit can be controlled by both DMX and remote controller. If a DMX is
applied, wireless remote controller will not work.
When using remote control you need to pull out the antenna.
1 ON
Address "1" ON
2 ON
Address "3" ON
3 ON
Address "5" ON
SET
When use different remote control
5 S
All units work during 5 seconds
30 S
All units work during 30 seconds
EN 4
ON/OFF
Explanation
Press "ENTER" to restore all parameters to the factory
settings.
In ON position, the machine can only generate sparks
when the pre-heating process is finished
Functions
Fountain OFF
Fountain ON
Functions
Clear Material
Emergency Stop
Pre-heat OFF (Disabled in Auto-heat)
Pre-heat ON (Disabled in Auto-heat)
1 OFF
Address "1" OFF
2 OFF
Address "3" OFF
3 OFF
Address "5" OFF
CLEAR
Automatically clean material for 3 seconds
15 S
All units work during 15 seconds
OFF
All stop
© Copyright LOTRONIC 2018