Safety Recommendations; Operation Panel - LOTRONIC AFX LiGHT SPARKULAR-MINI-FALL Manuel D'utilisation

Please read this manual carefully before operating this product.

SAFETY RECOMMENDATIONS

• Don't try to repair the unit by yourself or you invalidate the warranty. Repairs must only be car-
ried out by a qualified technician.
• Keep the unit dry and do NOT use in rain or snow.
• Make sure the lid of the feeding hopper is well covered when using the unit. Accidentally burning
of Ti powder can only be extinguished with sand. Composite Ti should be kept away from mois-
ture and stored in a dry, sealed environment.
• Keep audience and flammable material at a minimum distance of 3m from SPARKULAR-MI-
NI-FALL. Make sure the sparks shoot out by the unit can NOT touch any objects.
• Clean the unit before and after the show. Make sure that no Composite Ti remains in the pipe and
the nozzle. Remove all residues of Composite Ti aggregate, otherwise it will affect the shooting
effect or even damage the unit. Let it cool down for at least 5 minutes after power off.
• The supplied power cable is suitable for the connection of up to 12 units. Do not connect more
units as this might result in damage and even cause fire.
• For better heat dissipation, never block the air intake and air outlet.
• Do not cover the nozzle of the unit.
Features
:
• Silent operation
• Ultra light weight
• Low power consumption

OPERATION PANEL:

LCD information display area, showing operate menu and
working status of machine.
LIGHT EMITTING DIODE DISPLAY AREA :
READY : After turning on the machine, it will automatically preheat for around 6 minutes. When
the "READY" green light turns from flashing into steady on, the machine is ready to work
DMX : Flashing means that DMX signal is connected, otherwise
there is no signal
FAULT : When any malfunction, the light turns on
HEAT: When the machine is heating, signal light turns on
BOTTOM INDICATION LIGHT:
Quick Flashing: Preheating
Long on: Finish preheating and ready to work
Slow Flashing : Error warning
CONTROL BUTTON AREA :
MENU : Short press to switch interface, press for 3 seconds to switch to the advanced setup inter-
face.
- : Reduce value
+ : Increase value
ENTER : Confirm and save values.
EN 2
USER MANUAL
© Copyright LOTRONIC 2018