Basic Operations; Selecting A Component - Sony TA-VE910 Mode D'emploi

Basic Operations

Selecting a Component

To listen to or watch a connected component, first
select the function on the amplifier or with the remote.
Before you begin, make sure you have:
• Connected all components securely and correctly as
indicated on pages 5 to 9.
• Turned MASTER VOLUME to the leftmost position
(0) to avoid damaging your speakers.
SPEAKERS Digital processing control buttons
POWER DIRECT PASS
POWER
TONE
SUR INDEX
VIDEO 1 VIDEO 2 VIDEO 3 LD TV
DPC
MODE
STANDBY
SPEAKERS
A
OFF B
+
A B
VIDEO FUNCTION
PHONES
DIMMER DISPLAY
VIDEO/AUDIO
FUNCTION
DIMMER
PHONES
1
Press POWER to turn on the amplifier.
The STANDBY indicator turns off.
2
Select the component you want to use:
Press
To watch or
(repeatedly)
listen to
VIDEO
Video tapes
FUNCTION
Video camera VIDEO
FUNCTION
recorder or video
game
Laser discs VIDEO
FUNCTION
TV programs VIDEO
FUNCTION
AUDIO
Audio tapes
FUNCTION
MiniDiscs (MD) or AUDIO
Digital Audio Tapes FUNCTION
(DAT)
Compact Discs (CD) AUDIO
FUNCTION
SET UP MASTER VOLUME
MASTER VOLUME
TAPE DAT / MD CD TUNER PHONO
DIRECT PASS
DISCRETE
BALANCE
BASS
BOOST
DIRECT SOUND FIELD
PASS
SET UP ON / OFF
GENRE MODE
AUDIO FUNCTION INPUT
L R
MODE
VIDEO 3 INPUT
S VIDEO VIDEO L AUDIO R
INPUT BASS BALANCE
MODE BOOST
To light up
VIDEO 1 or VIDEO 2
VIDEO 3
LD
TV
TAPE
DAT/MD
CD
Basic Operations
To watch or Press
listen to (repeatedly)
Radio programs AUDIO
FUNCTION
Records AUDIO
FUNCTION
3
Turn on the component, for example, a CD player,
and then start playing.
4
Turn MASTER VOLUME to adjust the volume.
To adjust the volume of the TV's speakers, use the
volume control on the TV.
z
To listen to digital program sources
Do the procedure below.
1 Do Steps 1 and 2 above to select the component.
2 Press INPUT MODE repeatedly to select input mode
for the component.
When you select The amplifier selects
AUTO INPUT the component connected to the
following jack(s) depending on
the component selected in Step 1
above (listed in order of priority).
When you selected LD:
1 the AC-3 RF jack
2 the COAXIAL jack
3 the OPTICAL jack
4 the analog jacks
When you selected CD or DAT/
MD:
1 the OPTICAL jack
2 the analog jacks
*
the component connected to the
DIGITAL(AC-3 RF)
LD IN AC-3 RF jack
the component connected to the
DIGITAL
*
COAXIAL jack
(COAXIAL)
the component connected to the
DIGITAL
OPTICAL jack
(OPTICAL)
ANALOG INPUT the component connected to the
analog jacks
*
Appears only when you selected LD in Step 1
Getting Started
To light up
TUNER
PHONO
(Continued)
EN
11