Location Of Parts And Basic Operations; Front Panel Parts Description - Sony TA-E9000ES Mode D'emploi

Location of
Parts and Basic
Operations
This chapter provides information
about the locations and functions of
the buttons and controls on the front
panel and the various jacks on the
rear panel. It also explains basic
operations.
12 GB
Front Panel Parts
Description
1 U switch
Press to turn the control amplifier on and off.
• Before you turn on the control amplifier, make sure that
you have turned the MASTER VOLUME control to the
leftmost position to avoid damaging you speakers.
STANDBY indicator
Lights when the control amplifier is turned off
(standby mode) and turns off when the control
amplifier is turned on.
2 INPUT SELECTOR control
Turn to select the component you want to use.
To select
VCR
LD player
DVD player
TV tuner
TV or DBS tuner
Tape deck
MD or DAT deck
CD player
Tuner
Turntable
After selecting the component, turn on the component
you selected and play the program source.
• After selecting VCR, LD player, or DVD player, turn on the
TV and set the TV's video input.
3 Input indicators
Light to indicate the current source component(s).
Turn to light
VIDEO 1, VIDEO 2, or VIDEO 3
LD
DVD
TV (Europe only)
TV/DBS (USA/Canada only)
TAPE
MD/DAT
CD
TUNER
PHONO