D-Link DKVM-2K Guide D'installation page 2

Masquer les pouces Voir aussi pour DKVM-2K:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
Check Your Package Contents
Installing the DKVM-2K
Make sure that all your computers are turned OFF before installing the DKVM-
2K to avoid mouse and keyboard errors when booting up your computers.
A.
Attach your monitor's
VGA connector to the
console port of the
DKVM-2K.
The following steps below apply to both the computers that you are using with your DKVM-2K.
D.
Attach the DKVM-2K's
monitor cable to the
VGA port located on
the back of your
computer case.
Quick Installation Guide
DKVM-2K
2-Port PS/2 KVM Switch
B.
Attach your PS/2
keyboard connector
to the DKVM-2K
keyboard port.
E.
Attach the DKVM-2K's
keyboard cable to the
PS/2 keyboard port
located on the back of
your computer case.
DKVM-2K PS/2 KVM switch
with attached cables
1
C.
Attach your PS/2
mouse connector to
the DKVM-2K mouse
port.
F.
Attach the DKVM-2K's
mouse cable to the
PS/2 mouse port
located on the back of
your computer case.

Publicité

Table des Matières
loading

Table des Matières