Getting To Know Your Nutri Ninja® Pro; Before First Use; Use - Ninja BL450 Série Guide D'utilisation

GETTING TO KNOW YOUR NUTRI NINJA® PRO
MAIN UNIT
A Pro Extactor Blades® Assembly
B
Sip & Seal® Lid (x2)
C 18 oz. Nutri Ninja Cup
D 24 oz. Nutri Ninja Cup
E
Motor Base
F Power Cord (not shown)
C

BEFORE FIRST USE

1 Remove all packaging material and labels from the appliance. Separate/remove all
parts from each other.
2 Wash the lids, Nutri Ninja cups and Pro Extractor Blades® Assembly in warm, soapy water.
When washing the Pro Extractor Blades Assembly, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
3 Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air
dry thoroughly.
4 The lids, Nutri Ninja Cups, and Pro Extractor Blades Assembly are all dishwasher safe.
It is recommended that the lids and Pro Extractor Blades Assembly be placed on the
top rack. Ensure that the Pro Extractor Blades Assembly is removed from the cups
before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
6 ninjakitchen.com
A B
D E

USE

IMPORTANT: Review all warnings
on pages 4–5 before proceeding.
TIPS:
• For best results, use short "PULSES".
ASSEMBLY
1 Place the motor base on a clean, dry,
level surface such as a counter or table
top. Add ingredients to the Nutri Ninja®
cup. Place the Pro Extractor Blades
Assembly onto the cup and twist it on
tightly until you have a good seal.
NOTE: Do not overfill! To avoid spilling,
do not add ingredients past the "MAX"
fill line.
2 Turn the cup upside down and place it
onto the motor base, aligning the tabs
on the cup with the motor base. Turn it
clockwise, the unit is ready for use.
PULSE
3 Press down on the top of the cup
in short intervals to activate.
REMOVAL
4 When you have reached your desired
consistency, stop the appliance by
removing your hand from the cup.
Wait for the motor to stop running.
Then turn the cup counterclockwise
and pull straight up to remove.
5 Turn the cup upright and remove
the Pro Extractor Blades Assembly
by twisting the Pro Extractor Blades
Assembly counterclockwise.
6 Do not store blended contents with the
Pro Extractor Blade Assembly attached.
7 Place the Sip & Seal lid onto the cup,
twist to seal and enjoy!
8 For storage, only use Sip & Seal lid
to cover.
9 Be sure to store the Pro Extractor
Blades Assembly attached to an
empty cup when not in use.
10 Make sure that the motor base is
unplugged when not in use.
ninjakitchen.com ninjakitchen.com 7 7