TMB TOP Série Manuel D'utilisation Et D'entretien page 15

N.B:
Cleaning wet surfaces:
1.
).
2. Check that the plug on the power cable is connected to the power supply socket, otherwise
disconnect it.
WARNING:
3.
N.B:
4.
N.B:
5.
6. Plug the power cable into the mains socket.
ATTENTION:
7.
N.B:
8. Start work.
If when working a reduction in the vacuuming power is noted or the noise of the appliance becomes
louder:
•
• Remove the plug from the power socket.
WARNING:
•
• Empty the collection tank.
N.B:
•
•
•
• Start working again.
Take the appliance to the designated machine storage place after work is completed.
ATTENTION:
EMPTYING THE COLLECTION TANK
At the end of the work, and before carrying out any type of maintenance, perform the following
operations:
1. Take the appliance to where its collection tank is emptied.
N.B
CAUTION
2.
).
3. Check that the plug on the power cable is connected to the power supply socket, otherwise
disconnect it.
WARNING:
4. ) and lay it on the ground.
5. Empty the collection tank.
N.B:
N.B:
6.
).
).
).
).
).
).
).
maintenance:
1. Take the device to its maintenance area.
CAUTION
2.
3. Check that the plug on the power cable is connected to the power supply socket,
).
otherwise disconnect it.
WARNING:
4.
5.
6.
N.B:
7.
8.
N.B:
).
9.
).
10.
This chapter lists the most common problems linked with the use of the appliance. If you are unable
to resolve the problems with the information given here, please contact your nearest assistance
centre.
PROBLEM
The main switch is not activated.
The plug on the appliance's power
cable
inserted into the mains socket.
the appliance do not match the
supply network.
The power cable is damaged.
The vacuum hose is not connected
correctly to the nozzle on the
collection tank.
The vacuum hose is not connected
correctly to the extension hose.
The
connected correctly to the vacuum
accessory being used.
The vacuum circuit is blocked
vacuum accessory).
There is a blockage in the vacuum
15
MAINTENANCE
).
) and lay it on the ground.
).
).
TROUBLESHOOTING
POSSIBLE CAUSE SOLUTION
Press the main switch.
Connect the plug on the appliance's
has not been correctly
power cable to the mains socket.
Check that the technical data on
the appliance's serial number plate
match the data of the mains supply.
Contact a specialised technician
immediately.
Connect the vacuum hose correctly
to the nozzle on the collection tank.
Connect the vacuum hose correctly
to the extension hose.
extension hose is not Connect the
correctly to the vacuum accessory
being used.
Remove the obstruction in the
vacuum circuit.
Clear the obstruction in the vacuum
extension tube