Cleaning And Care - SilverCrest SED 3.7 G3 Mode D'emploi

Cleaning and Care

RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains power
adapter and the mains power adapter
supply.
WARNING! PROPERTY DAMAGE!
► NEVER submerse the appliance in water or other liquids!
■ After every use clean the epilator head
cleaning brush
■ Disinfect the epilator head
cleaning it with disinfectant spray.
■ To thoroughly clean the epilator head
from the appliance:
― Press the two restraint fixtures
time pull the epilator head
― Clean the epilator head
it to dry.
― Place the epilator head
tor head
■ Clean the appliance housing and the mains power adapter
with a moist cloth. If required, use some mild detergent on the
cloth. Ensure that the appliance is completely dry before the
next use.
SED 3.7 G3
to remove loose hairs.
back onto the appliance. The epila-
must audibly engage.
from the main power
with the supplied
regularly by spraying and
you can remove it
together and at the same
upwards.
under running water and then allow
GB │ IE │
37 ■