Eagletone DPW 400 Guide De L'utilisateur page 40

VOLUME BALANCE
The Volume Balance function will set volume balance between the master and second voice in the dual
voice mode.
When you enter this mode by pressing the SETUP button, the display shows «bLn». The format of the setting
is «The second volume – The master volume», each parameter ranging from 1 to 9, 1 referring to the mini-
mum volume and 9 to the maximum volume.
The default setting of the volume is balanced as 5 – 5.
Use the ▼ button to reduce the second volume and increase the master volume, for example 4 – 6, 3 – 7
down to 1 – 9.
Use the ▲ button to increase the second volume and reduce the master volume, for example 6 – 4, 7 – 3
up to 9 – 1.
Press the ▲ and ▼buttons simultaneously to recall the default setting of 5 – 5.
LOCAL OFF
«LOCAL OFF» is a special mode of piano performance in which the piano is connected with another MIDI
device or computer. When «Local is «ON», the performance on the piano will sound via the built-in speakers
while the performance message will be transmitted via MIDI out.
When «Local» is «OFF», the performance on the piano will not sound via the built-in speakers but the per-
formance message is transmitted via MIDI out. This feature is useful in case you wish to use the piano as a
keyboard and have the sound produced by another MIDI device.
When you enter this mode by pressing the SETUP button, the display shows «Loc».
Use the ▼button to turn «Local» off and the ▲ button to turn it on. The default setting is «On».
NOTE :
When Local is off, the metronome will sound as normal.
STORE
Normally, when you turn the power on, all settings are default and user-settings are volatile. If the «STORE»
feature is engaged, when you turn the power on, the latest user customized settings will be recalled. These
include: LAYER and DUET voices, volume balance, touch mode, song number, sound effects settings, etc.
When you enter this mode by pressing the SETUP button, the display shows «Sto».
Use the ▼ button to set the store feature off and use the ▲ button to set it on. The default value is Off.
NOTE :
The record contents are always nonvolatile.
18