Unpacking And Setting Up - Sangean RS-330 Mode D'emploi

． Sleep timer automatically shuts off radio on the selected sleep time (up to 6
hours).
． A built-in timer with beeper alarm can be set for short-term or a maximum of up
to 6 hours.
． Dual alarms work through the RS-330 and the RS-332 independently.
． "Ramp-up" alarm raises volume level slowly, over a 10-second period.
． Distinctive beepers for Alarm 1 and Alarm 2.
． Snooze control for an extra five minutes of sleep.
． Built-in one-hour super capacitor backup system keeps clock and alarm
settings as well as station presets in the event of a power failure.
OPERATING INSTRUCTIONS

UNPACKING AND SETTING UP

This manual covers installation and operation of the RS-330 Digital FM/AM Stereo
Clock Radio. The optional RS-332 High-Fidelity Clock Radio Stereo Speaker is
required for stereo listening (although you can listen through stereo headphones
with the RS-330 by itself).
After unpacking the RS-330, plug its power cord
outlet. 120 volt AC power is standard throughout most of North America. Voltage
varies in other parts of the world. The RS-330 may emit a "thump" when first
plugged in; this is normal.
There is an FM MODE switch
If you are using the RS-332 High-Fidelity Clock Radio Stereo Speaker, set this
switch to STEREO to hear stereo broadcasts. If you are listening to the RS-330
by itself, set this switch to MONO.
THE DISPLAY
The fluorescent display shows the current time, station frequency, alarm settings,
and operational modes.
A light sensor at the base of the display automatically adjusts the display' s
brightness to compensate for changes in room lighting. You can modify the
automatic setting with the recessed knob
this knob clockwise to make the display brighter, counter-clockwise to make it
dimmer.
RS-330_381B101A.p65
24
next to the control cable jack on the back panel.
32
6
Page 6
30
into an appropriate AC power
on the bottom of the RS-330. Turn
2003/6/18, 下午 02:24
E
Adobe PageMaker 6.5C/Win