1/4" & 1/8" DriLL BiTS
DriLL
perCeUSe
penciL
CrAYon
*
Utiliser une mèche de ¼" destiné à céramique lors du perçage des tuiles en céramique.
poSSiBLe configUrATionS / ConfigUrAtionS poSSiBLeS
*
TooLS reQUireD / oUtiLS reQUiS
MÈCHe 1/4" & 1/8"
TApe MeASUre
rUBAn À MeSUrer
*
Use a ¼" drill bit for ceramic when drilling into ceramic tiles
poSSiBLe configUrATionS / ConfigUrAtionS poSSiBLeS
*
This configuration and BSSU3660 base is illustrated in this manual.
The same configurations are possible with the ABAL3660 base.
*
Cette configuration et BSSU3660 est illustrée dans ce manuel.
Les mêmes configurations avec la base ABAL3660 sont possibles.
Long noSe LocKing pLierS (X3)
pinCe Serre ÉtAU (X3)
SiLicone
SCeLLAnt
ScreWDriVer
toUrneViS
LeVeL
niVeAU