Fujitsu Siemens Computers ACTIVY 150 Manuel De L'utilisateur page 143

Use the up and down arrows on the remote
control to navigate the options. Press OK on the
remote control to make a selection.
Audio/Video
In the General menu, use the down arrow on the
remote control to select the Audio/Video option
and press OK.
To select the setup options, press the OK button
on the remote control when the appropriate
window is highlighted. You can then make your
selection using the arrows on the remote control.
Press OK to confirm.
The following setup options are available here:
Aspect ratio:
Video output:
Display resolution:
Audio output:
PIP:
Additional settings
In the General menu, use the down arrow on
the remote control to select the Additional
settings option and press OK.
16:9, 4:3
Set the aspect ratio according to the TV
connected.
Composite, S-Video/AV, RGB, YUV, HDMI
If you have connected your AMP 150 via SCART,
we recommend the RGB setting for optimum
image quality.
576 i @ 50 Hz
576p @ 50 Hz
720p @ 50 Hz
720p @ 60 Hz
1080i @ 50 Hz
1080i @ 60 Hz
Auto (with HDMI)
Analogue, digital
Activated, deactivated (see also chapter 8.4.4)
57
ACTIVY Media Player 150
COM