Configuring Wi-Fi Connection Settings
Note
Before you set the WLAN configuration, you need to ask your WLAN service provider or your network
administrator for the IP settings.
v
Tap Start > Settings > Connections > Wi-Fi.
v
Tap Network Adaptor tab and select Broadcom 802.11 DHD Network.
v
If you tap Use specific IP address, you need to fill in IP address,
Subnet mask and Default gateway assigned by your
WLAN service provider or network administrator.
v
Fill in IP address, Subnet mask, and Default gateway.
v
Tap Name Servers.
v
Fill in DNS and Alt DNS, WINS and Alt WINS, if necessary.
Note
To prevent from the possible data loss of your phone, WLAN automatically ends when the battery almost
runs out at the level of below five percent.
63