Installing The Appliance - Panasonic KY-B625GB Mode D'emploi Et Instructions D'installation

Installing the Appliance

WARNING
Do not disassemble the top plate. Connected wire may become loose
and cause a malfunction.
Correct
Incorrect
CAUTION
If the cabinet does not have an opening in the front, the wiring needs
to be connected before the appliance is embedded into the countertop.
46
EN
1. Fasten the clamps to the appliance (2 places at
rear).
■ Place the appliance on the packaging upper
■ Match the clamp grips with the holes on the
Upper Filler
2. Embed the appliance in the countertop cutout
while keeping it is as level as possible.
■
■
■
3. Connect the power cord
■ See page 45.
filler when fitting clamps to prevent damage to
the countertop.
sides of the appliance, then slide the clamp
from the right to the left to fasten them to the
appliance.
Do not drop the appliance on the countertop.
Press down on top of the appliance to make
sure that it rests on the countertop.
Make sure that the spaces between the
countertop and the under surface of the
appliance are even in the front, rear, left and
right.