Use Shoulder & Waist Harnesses; Adjust Calf Support; Use Front Swivel Lock; Use Brake - Joie BRISK Manuel D'utilisateur

Use Shoulder & Waist Harnesses
see images
14 - 16
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
14 Shoulder harness anchor A
- 2
14 Shoulder harness anchor B
- 3
Slide adjuster
14
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
Use either shoulder harness anchor in the slots that are closest to child's shoulder height.
Use slide adjuster to change the harness length.
- 2
Press the button 16 , while pulling the waist harness to proper length

Adjust Calf Support

see images
17
Raise Calf Support
To raise the calf support, just push it upwards.
Lower Calf Support
Press the adjustment buttons on both sides of the calf support

Use Front Swivel Lock

see images
18
Pull up the front swivel locks to maintain the moving direction.
Tip
It is recommended to use swivel locks on uneven surfaces.

Use Brake

see images
19
To lock wheels, step the brake lever downwards.
To release wheels, just lift the brake lever upwards.
Tip
The brake must be engaged when placing and removing children.
Tip Always apply brake when stroller is in stopped position. To ensure brake is fully engaged, gently rock
the stroller backwards and forwards before releasing the handle.
Tip Clean brake system regularly to ensure fully functional. See care and maintenance section.

Use Canopy

see images
20
To open the canopy, pull canopy forwards and press stretchers down on both sides.
To fold the canopy, pull up the stretchers on both sides
15
15
- 1
16
- 3
16 .
- 1
17 , and rotate the calf support downwards.
18
19
20
20 - 1
and pull canopy toward back.

Fold Stroller

see images
21 -
Press the folding button
21 - 3
. Lock the stroller by tucking storage latch onto the storage mount
locked completely.

Use Carry Strap

see images
23
You can carry the stroller with ease by lifting the carry strap.

Accessories

Accessories may be sold separately or may not be available depending on region.
Use Rain Cover
see images
24 -
To assemble the rain cover
on the rain cover. 25
!
- 2 When using the rain cover, please always check its ventilation.
17
!
When not in use, please check the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
Use Footmuff
see images
26 -
The soft footmuff can provide your child with a warm and comfortable environment.
Assemble the footmuff by following these steps.
1. Place the footmuff over the seat after unziping it, thread the shoulder harnesses, waist harnesses and crotch
harness through respective slots.
2. Stick the hook and loop fasteners.
3. Place baby into the footmuff, lock the safety buckle, and then rezip the footmuff. The assembled footmuff is
shown as 29
!
For the using method for restraint system, please refer to the relevant section in the instruction manual.
Use Armbar
see images
Use Shoulder Harness Cover
The shoulder harness cover can be removed from the webbing. To assemble shoulder harness cover in reverse
steps.
22
- 1
21 and rotate the folding handle upwards
22
23
25
, place it over the stroller, and then attach the 4 pairs of hook and loop fasteners
24
29
27
28
-
30 32
- 2
21 , push the stroller forward to fold
22 - 1
, then the stroller is folded and
26
16